Circuit breakers protect your electrical power system as well as the devices connected to it when there is a power overload. It functions by tripping and disconnecting electricity. However, there are times when this device trips at an overly high rate. 

Here are some of the possible causes for this problem and the reasons you need to get the assistance of an electrician.

Circuit overload

A power overload is the most common explanation for the frequent tripping of a circuit. It is an indicator that the power demanded to run the household is higher than what the electrical system can supply. It can also be caused by poor wiring. To address this problem, contact an electrician to inspect the system and identify the specific problem. A professional electrician will also advise you on distributing your appliances evenly across the available circuits to prevent an overload.

Short circuit

A short circuit happens as a result of a neutral wire and a hot wire coming into contact, causing a current overflow. This excess power produces heat, triggering your breaker to tripping off. You will need an electrician to identify and fix the loose connections or faulty wiring in this situation. Short circuits can be dangerous because they cause fires, and as such, they should be addressed with haste.

Ground fault

Ground faults arise when a hot circuit comes in contact with a conductive surface, diverting the electric flow from the wire to the conductive area. There are several reasons this may occur, such as when your electric system comes into contact with water. If you notice this, contact an electrician. They will determine the cause of the electric diversion and correct it accordingly.

Faulty breakers

A faulty breaker keeps tripping without cause. These devices should be regularly inspected and maintained to improve their effectiveness. Only a trained linesman can safely examine the device and identify defects. They will also replace any parts that are out of order.

Arc fault

An arc fault is caused by an electrical leak that occurs when you have a faulty or loose wire in your power system. It is difficult to identify an arc fault, which makes it imperative to consult an electrician. The professional will fix the wiring to avoid any leakage.

The circuit breaker protects your home from risks associated with electrical faults. However, when it trips regularly, it fails to meets its purpose. As such, it is recommendable to consult with your electrician when the tripping becomes excessive. 

Share